wearyourheartout

Ever wanted to block someone from the network or limit their bandwidth without having the network admin privileges? Well Evil Limiter has got you covered then.

An amazing tool to help you control your network without having access to the admin panel.
Today I'm gonna show you how to use this interesting tool to take control of your network.

Requirements:

1. A PC or Laptop with Linux OS.
2. A Network Adapter.
3. Access to the Network you want to control.
4. sudo or root access on your Linux OS.

First of all we will download the tool from its github repository:
https://github.com/bitbrute/evillimiter

You can download and extract the zip file from the link above or you can clone evillimiter repository using git like this:

git clone https://github.com/bitbrute/evillimiter

Now lets install the downloaded tool on our machine
Step 1: Move inside the downloaded github repository

cd evillimiter

Step 2: To install type

sudo python3 setup.py install

wait for the installation to finish (May take some time)

Step 3: To run type

sudo evilimiter

Voila! That's it, you got it up and running on your machine

Now how do you control your network with it, its very easy.
It should detect your network automatically but yeah you can set it up manually as well using the command line argument -i.

After you have selected the right interface to control, you need to scan your network for live hosts. To perform the scan type

scan

you can pass an optional flag to the scan command which is range which will help you to specify the range of ip addresses you want to scan like this

scan --range 192.168.1.1-192.168.1.100

The above command will scan a total of 100 hosts from 192.168.1.1 to 192.168.1.100

Now after you have scanned your network next thing is to list the hosts that have been discovered during the scan for that you type the hosts command like this

hosts

Now you know the hosts on your network and now you should know which host you wanna block or limit based on the mac address of the host. Remember the host id of the host that you want to block or limit bandwidth of and lets do the magic.
to block a host from using the internet we simply specify the block command followed by the host id of the host that we want to block like this

block 1

if instead of blocking the host we just want to limit his internet bandwidth we can do just that by using the limit command followed by the host id and then the bandwidth that we want to allocate to that particular host like this

limit 1 100kbits

Wohooo! yeah its that easy and yes you can do all this without having the network admin role.
Now if you want to show mercy on that poor guy (blocked host), you can set him free by using the free command followed by the host id like this:

free 1

Well isn't administrating your network bandwidth so easy now.
Hope you enjoyed this tutorial.:)

Related news

In this post, we present our new Burp Suite extension "TLS-Attacker".
Using this extension penetration testers and security researchers can assess the security of TLS server configurations directly from within Burp Suite.
The extension is based on the TLS-Attacker framework and the TLS-Scanner, both of which are developed by the Chair for Network and Data Security.

You can find the latest release of our extension at: https://github.com/RUB-NDS/TLS-Attacker-BurpExtension/releases

TLS-Scanner

Thanks to the seamless integration of the TLS-Scanner into the BurpSuite, the penetration tester only needs to configure a single parameter: the host to be scanned. After clicking the Scan button, the extension runs the default checks and responds with a report that allows penetration testers to quickly determine potential issues in the server's TLS configuration. Basic tests check the supported cipher suites and protocol versions. In addition, several known attacks on TLS are automatically evaluated, including Bleichenbacher's attack, Padding Oracles, and Invalid Curve attacks.

Furthermore, the extension allows fine-tuning for the configuration of the underlying TLS-Scanner. The two parameters parallelProbes and overallThreads can be used to improve the scan performance (at the cost of increased network load and resource usage).

It is also possible to configure the granularity of the scan using Scan Detail and Danger Level. The level of detail contained in the returned scan report can also be controlled using the Report Detail setting.

Please refer to the GitHub repositories linked above for further details on configuration and usage of TLS-Scanner.

Scan History

If several hosts are scanned, the Scan History tab keeps track of the preformed scans and is a useful tool when comparing the results of subsequent scans.

Additional functions will follow in later versions

Currently, we are working on integrating an at-a-glance rating mechanism to allow for easily estimating the security of a scanned host's TLS configuration.

This is a combined work of Nurullah Erinola, Nils Engelbertz, David Herring, Juraj Somorovsky, Vladislav Mladenov, and Robert Merget. The research was supported by the European Commission through the FutureTrust project (grant 700542-Future-Trust-H2020-DS-2015-1).

If you would like to learn more about TLS, Juraj and Robert will give a TLS Training at Ruhrsec on the 27th of May 2019. There are still a few seats left.

Related news

wearyourheartout

Saturday, August 29, 2020

Evil Limiter: Taking Control Of Your Network Bandwidth

Requirements:

Scanning TLS Server Configurations With Burp Suite

TLS-Scanner

Scan History

Additional functions will follow in later versions

How to

Blog Archive

Followers